Recommended

Mineral wool Knauf Omnifit Slab 35 50mm (1200x600)

£ 7.00

Required field!
Required field!
Required field!

Partition walls wools Rockwool ROCKTON SUPER 100mm, Kroczyce, Poland


Katarzyna from Kroczyce, near Zawiercie, has built a beautiful cottage using Rockton Super stone wool to insulate the partition walls. You have to admit that the effect knocks your socks off.


Features:

The thermal conductivity coefficient lambda λD is 0.035 W/mK and the density of this wool is 43 kg/m³. Stone wool boards for use on the exterior and interior of buildings for thermal, acoustic and fire insulation. Other available thicknesses in mm: 40, 50, 60, 70, 80, 100, 120, 140, 150, 160, 180, 200

Check other sizes


Usage:

LOFT
Mineral wool for thermal insulation and insulation in usable and non-usable attics and lofts: above the rafters, between the rafters, under the rafters as well as suspended ceilings and knee walls (so-called dry construction).

PARTITION WALLS
Mineral wool for insulation and insulation of walls from the inside, construction of partition walls, pre-walls, partition walls and industrial pre-walls.

FRAME CONSTRUCTIONS, CEILINGS, FLOORS ON JOISTS
Mineral wool for insulation and insulation of: floors on a grid, industrial ceilings, ventilated flat roofs, floors on joists on a wooden or steel structure, suspended ceilings, external and internal walls of frame houses and wooden houses.

VENTILATED FACADES
Mineral wool for thermal insulation and insulation of external walls using the light dry method with panel covering, external walls with a stone or glass facade, skeletal external and internal walls.

THREE-LAYER WALLS
Mineral wool for insulation and insulation of gaps between masonry and prefabricated walls in external and internal walls and basements.

Compare 0 / 3